Synopsys 640-pin Generic Device Adapter Manual do Utilizador descarregar pdf (Página 9)

November 2001 Synopsys, Inc. 9

The ModelSource 640-pin Adapter Chapter 1: Describing a 640-pin Logic Model

Describing a 640-pin Logic Model

This chapter describes the necessary components and provides a procedural summary

for building a 640-pin Logic Model.

Hardware Requirements

To build a complete 640-pin Logic Model using the 640-pin Adapter, you need the

following hardware:

● The device you want to model, henceforth referred to as the device under test

(DUT). The DUT can have up to 640 input, output, and I/O signals, exclusive of

supply voltage and auxiliary signals. The DUT can include more than one physical

package, as long as the components fit within an area approximately 6” x 6”.

● One 640-pin Generic Device Adapter Daughterboard, henceforth referred to as the

“Daughterboard”, to which you attach the DUT.

● Four ModelSource modeling systems, either 4 MS3200 units or 4 MS3400 units.

You cannot mix these two types of units.

● One 640-pin Adapter, which provides the interface between the modeling systems

and the Daughterboard.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

Sem comentários

Synopsys 640-pin Generic Device Adapter Manual do Utilizador Página 9